Mk-5000g setup – Barranca Diamond MK-5009G/5013G User Manual
Page 14
14
Fill Throat
Upper Limit
Filling Fuel Tank
1. Gasoline is highly flammable and explosive. You can be burned or seriously injured when
handling fuel.
2. To fuel, stop engine if running, and allow it to cool.
3. Refuel in a well-ventilated area.
4. Keep gasoline away from appliance pilot lights, barbecues, electric appliances, power tools, etc.
5. Wipe up spills immediately.
1. Fuel can damage paint and plastic. Be careful not to spill fuel when filling the fuel tank.
Damage caused by spilled fuel IS NOT covered under the warranty.
2. DO NOT use stale or contaminated gasoline, or an oil/gasoline mixture.
3. Using a ladder meeting OSHA specification is recommended.
4. Use unleaded gasoline with a pump octane rating of 86 or higher.
WARNING
NOTE:
MK-5000G SETUP
(A)
To fill Fuel Tank refer to refueling
section of Engine Manual
(B)
Verify fuel level is below the
throat of the Fuel Tank
Pre-start Inspection
The pre-start inspection should be performed before beginning any job.
CAUTION If the Diamond Blade shows signs of fatigue cracking, replace the blade before starting work.
(A)
Inspect Blade for damage –
Verify Blade is correct for
material being cut
(B)
Inspect Wooden Strip for
excessive grooves
(C)
Verify Movable Cutting Table
moves freely