Barranca Diamond MK-5009G/5013G - Manual (Page 32)

32
(J)
Check belt tension (proper tension
1/8" deflection of the belt).
Continue adjusting belt until tension
is correct then tighten the Engine
Plate Mounting Bolts
(K)
Install the Belt Guard
Blade Shaft Belt
(A)
Remove the Belt Guard
Retaining Bolts
(B)
Inspect the belt for cracks, fraying,
separation and wear. Go to step D
if replacement required
(C)
Check Belt for proper tension.
(proper tension 1/8-inch deflec-
tion of the belt)
(D)
Loosen engine mounting plate
If re-tensioning, go to step J
(E)
Loosen Engine Adjustment
Strap Lock-nut then loosen the
Engine Adjustment Strap.
(F)
Push the Engine Mounting Plate
toward the front of the unit to
loosen the belt
MK-5000G MAINTENANCE