Axcess AxcessView User Guide - Manual (Page 30)

AxcessView User’s Guide
750.008.005 R0003 © 2007, Axcess International, Inc.. 30
Figure 16 An alarm dialog box
Types of Alarms
The following alarms can be displayed by AxcessView:
Linked Asset – No Owner Specified: [description] Indicates that an asset was
detected that did not have an owner assigned through the Asset Management section.
When this alarm appears, a warning message will state, “Primary Owner of [asset ID] not
found”
Beacon Timeout! The time period for a beacon tag read to expire.
[Name](Panic) Indicates that a person pressed the panic button on a panic Tag. The
device ID is reported as “0.”
Tamper Alarm! Indicates that a Tamper Tag has been removed from an asset. The
device ID is reported as “0.”
Warning – UNAUTHORIZED Asset Movement Detected: [description] Indicates that
a linked asset was read without the authorized owner being read within the specified time
window.
Zone Violation! (linked to the Zone Location designation in the asset/personnel record).