Axcess AxcessView User Guide User Manual

Page 14

AxcessView User’s Guide

750.008.005 R0003

Figure 3 Adding personnel information

Type the person’s name in the provided First Name and Last Name boxes. If the

name has already been entered, AxcessView notifies you that this is a duplicate.

Type the tag ID number in the Tag ID box.

NOTE

The tag ID is an eight-digit number is comprised of the 3-digit Facility Code

and the 5-digit tag ID number. Only the leading zeros may be omitted.

Select the Normal or Beacon tag type from the Tag Type drop-down list.

Normal

– this tag remains inactive until it passes an antenna generating a specific

RF activation field at which time it transmits a message

Beacon

– this tag transmits a message at specific intervals, regardless of whether it

pass through a RF field or not.

NOTE

Refer to the

Tag Types

section of this manual for more information.

To display an image when the Tag is read, enter a path to the JPEG or bitmap file or

click Browse. The

Browse

dialog box will appear.

Select a the file and click Open.

NOTE

Images must be in either bitmap or JPEG file format only.

Click OK. The new person is listed in the Personnel Dialog table.

Click Close to finish.

TIP

The information in the

Personnel Dialog

box can be sorted by clicking on the column

headings.