Axcess AxcessView User Guide - Manual (Page 20)

AxcessView User’s Guide
750.008.005 R0003 © 2007, Axcess International, Inc.. 20
Editing Device Information
Only the description and type of a device can be changed.
1: On the Devices tab of the Device-Zone Setup dialog box, select the device listed in
the table and click Edit. The Insert/Update section will become active.
2: Change the information displayed in the Description and Type boxes.
3: Click Update. The revised information will appear in the table.
4: Click OK to finish.
Deleting a Device
1:
On the Devices tab of the Device-Zone Setup dialog box, select the device and click
Delete.
2: You will receive a message box asking, “Delete [Device description]?” or if the device
has been assigned a zone, you will be asked, “[Device description] has
Relationships. Drop Relationships?”
Click Yes to delete the entry or click No to cancel. You will receive a message
saying, “Delete not confirmed. Delete canceled.” Click OK to cancel the delete.
3: Click OK to finish.
Zone Information
A Zone is the receiver ID or the device that has received the signal from the tag. To
create a zone, click the Zones tab (Figure 9).
Figure 9 Creating zones
Adding a Zone
1:
On the Zones tab on the Device-Zone Setup dialog box, click Add. The Insert/Update
section becomes active.