Axcess AxcessView User Guide - Manual (Page 29)

AxcessView User’s Guide
© 2007, Axcess International, Inc.. 750.008.005 R0003 29
including temperature.
Location-Description Activator ID and
description/location.
Zone-Description Receiver ID and zone
description. If a zone
has not been assigned,
“Unknown” will be
displayed.
Time/Date Time and date when
event occurred
Type Type of tag
Event A sequential number for
each event, including
alarm confirmations and
acknowledgments.
More information about an event can be viewed by double-clicking the line in the log list.
A window containing details about the event is displayed. The status of events in the log
list is designated by color:
Black Ordinary reading
Bold Red Alarm event
Red Acknowledged alarm
event
Blue Operator warning or
confirmed alarm event
or unknown tag read
Snapshots (currently not supported)
If a bitmap file has been assigned to an asset or person, it can be displayed below the
log list. From the View menu, select Stored Image - - or click the Display Stored Image
button on the tool bar.
If an MM-100 has been configured to take a snapshot when a Tag is read, the image can
be displayed by selecting Event Snapshot from the View menu -- or by clicking the
Display Video Snapshot (camera) button on the tool bar.
Alarms
When an alarm condition is detected, AxcessView displays a dialog box showing the
information about the event (Figure 16).