Axcess AxcessView User Guide - Manual (Page 28)

AxcessView User’s Guide
750.008.005 R0003 © 2007, Axcess International, Inc.. 28
Figure 15 Configuring the Beacon Tag Options
2: Fill in the Beacon Timeout (in numbers of minutes).
3: In the Timeouts before warning and Timeouts before alarm boxes, select the
number of times the tag should time out before sending a warning or an alarm.
4: From the Low battery generates drop-down list, select Warning or Message.
Choose to either display a pop-up window (Alarm) -- or, have a Warning
message listed in the Location Description box of the log list when a tag senses
low voltage.
5: For room temperature monitoring, fill in the boxes under Temperature. Set the
minimum and maximum temperatures you want AxcessView to monitor. Select
Fahrenheit or Celsius readings and set the number of alerts before a Warning is
sent. Enter the time interval (in minutes) for temperature checks in the Check
zones every < > minutes window.
6: Type the facility code you want the beacon tag to transmit.
7: Click OK to finish.
Reading Tags
When Tags are read, information associated with the Tag is displayed in the log list. If the
Tag is not entered into the database, it is labeled as “Unknown”.
The log list has the following headings:
Tag ID Facility Code and ID
number transmitted by
the Tag.
Comment/Description Employee’s name or
asset’s information.
Alarm messages