Axcess AxcessView User Guide - Manual (Page 19)

AxcessView User’s Guide
© 2007, Axcess International, Inc.. 750.008.005 R0003 19
5: Click the Delete button at the top left of the Asset List screen.
6: You will receive a message asking, “Do you really want to delete item?”
Click Yes to delete the asset information or click No to cancel.
7: Click Close to finish.
Device Information
Before zones can be created, remote device information must be entered into the
AxcessView database.
From the Configure menu, select System Configuration. The Device-Zone Setup dialog
box will appear (Figure 8).
Figure 8 Entering device information
Adding Device Information
1:
On the Device-Zone Setup dialog box, click the Add button. The Insert/Update
section will become active.
2: Type the device ID number.
(This is the Activator ID number.)
3: Enter a descriptive name for the device’s location.
4: Click Inside, Muster Site or Outside from the Tag Type drop-down list.
Inside – this read indicates that the person has logged into the building
Muster Site – this read indicates the tag is at this location.
Outside – this read indicates that the person is logged out to the building
5: Click Update. The information will be displayed in the table.
6: Continue to add devices or click OK to finish.