Axcess Network Receiver Installation Guide User Manual
Page 57
Network Receiver
© 2002, AXCESS Inc.
750.001.005 R0000
57
Usage: source FILE
Displays the current system status information.
Usage: stats
Starts up the specified slush server. You must be admin to use this command.
Usage: startserver [options]
where options include:
[-s] Serial Server
[-t] Telnet Server
[-f] FTP Server
Shuts down the specified slush server. You must be admin to use this command.
You can also use this command to disable the slush boot messages that go to serial0 with
the '-d' option.
Usage: stopserver [options]
where options include:
[-s] Serial Server
[-d] Disable console output. Used only with '-s'.
[-t] Telnet Server
[-f] FTP Server
Alias: downserver
Assume the identity of the specified user. Assumes root as default.
Usage: su [USER]
Sets the last modified time to the current time. If the file does not
exist, the
command will create a new 0 length file.
Usage: touch FILE
Adds a user to the list of known users for the system. You must provide the
username, password, and user ID for the new user. The command will prompt for
any information not supplied on the commandline.
Valid user ID's range from 0 to 255. All ID's large than 127 will have super user
privileges. The user ID of 0 is reserved for guest login, 128 is reserved for root. You
must be an admin to use this command.
Usage: useradd [OPTIONS]
where options include: