Axcess Network Receiver Installation Guide User Manual

Page 23

750.001.005 R0000

Figure 7 Enter the IP address and subnet mask

5. Click

and follow the prompts

NOTE

It may be necessary to reboot your PC after making the

above changes.

6. Using a standard CAT5 Crossover cable (included),

connect directly from the Ethernet port on the back or

side of the PC to the RJ45 connector on the front of the

receiver (Figure 8).

CAT5 Crossover

Cable

To the Ethernet

Port of the PC

Network Receiver Front Panel

PWR LF

UHF

RX TX

DATA

RX TX

Network Receiver

Figure 8 Connecting Crossover cable

7. On the PC, click

Start > Programs > MS-DOS Prompt.