Axcess Network Receiver Installation Guide User Manual

Page 46

Network Receiver

750.001.005 R04

Checking Memory Status

There are commands that provide a means of monitoring memory

status:

Displays the amount of free RAM

stats

Displays the current system status information

(including free memory).

Runs the system garbage collector to sweep up and

make available collectible memory. This command

only cleans up garbage generated by slush and not

garbage generated by other applications.

Manually Erasing the Log File (requires Admin authority)

1. Start the Watchdog by entering the command:

wd –p 6000 –i 8000

2. Get the process ID number by entering the command:

3. Kill the process by entering:

kill [process id number]

4. Erase the

axcess.log

file by typing:

rm axcess.log

5. Reboot the Tini by entering:

reboot

The application software will automatically create a new log file upon

boot-up that will again be at its minimal size.

Note:

The following pages give additional command information as

supplied by the provider of the Unix

-like interface with Serial

(TTY), Telnet, and FTP servers.

Note:

The following activity may require Administrator authority. It will

also be necessary access a specific Network Receiver from the DOS

prompt using telnet. For example:

C:\telnet XXX.XXX.XXX.XXX (IP address)

Then at the logon screen, log on to the Tini as previously described.