Belkin N1 Wireless Modem Router F5D8631-4 - Manual (Page 73)

EN-72 EN-71
Manually Configuring Network Settings
EN-72 EN-71
Set up the computer that is connected to the cable or DSL modem
FIRST using these steps. You can also use these steps to add
computers to your Modem Router after the Modem Router has been
set up to connect to the Internet.
Manually Configuring Network Settings in Mac OS up to 9.x
1.
Pull down the Apple menu. Select “Control Panels” and select
“TCP/IP”.
2. You will see the TCP/IP control panel. Select “Ethernet Built-In”
or “Ethernet” in the “Connect via:” drop-down menu (1).
(1)
(2)