Belkin N1 Wireless Modem Router F5D8631-4 - Manual (Page 33)

EN-32 EN-31
Alternate Setup Method
EN-32 EN-31
Alternate Setup Method
Setting your Connection Type to Dynamic IP (1483 Bridged)
This connection method bridges your network and ISP’s network
together. The Modem Router will obtain IP address automatically from
your ISP’s DHCP server.
1. VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual
Circuit Identifier (VCI) parameter here. These identifiers are
assigned by your ISP.
2. Encapsulation - Select LLC or VC MUX your ISP uses.
Click “Apply Changes” to save and activate your settings. To go
back to the original settings before saving, click “Clear Changes”.
Or click any of the Quick-Navigation links for other options. Your
new settings will not be saved unless your click “Apply Changes”.
(1)
(2)