Belkin N1 Wireless Modem Router F5D8631-4 - Manual (Page 36)

EN-34
Alternate Setup Method
EN-34
s
e
c
tio
n
2
1
3
4
5
6
7
8
9
10
Setting Custom Domain Name Server (DNS) Settings
A “Domain Name Server” is a server located on the Internet that
translates Universal Resource Locaters (URLs) like “www.belkin.com” to
IP addresses. Many Internet Service Providers (ISPs) do not require you
to enter this information into the Modem Router. The “Automatic from
ISP” box
(1) should be checked if your ISP did not give you a specific
DNS address. If you are using a static IP connection type, then you may
need to enter a specific DNS address and secondary DNS address for
your connection to work properly. If your connection type is dynamic or
PPPoE, it is likely that you do not have to enter a DNS address. Leave the
“Automatic from ISP” box checked. To enter the DNS address settings,
uncheck the “Automatic from ISP” box and enter your DNS entries in the
spaces provided. Click “Apply Changes”
(2) to save the settings.
(1)
(2)