Belkin N1 Wireless Modem Router F5D8631-4 - Manual (Page 29)

EN-28 EN-27
Alternate Setup Method
EN-28 EN-27
Alternate Setup Method
The “Internet/WAN” tab is where you will set up your Modem Router
to connect to your Internet Service Provider (ISP). The Modem Router
is capable of connecting to virtually any ISP’s system provided you
have correctly configured the Modem Router’s settings for your ISP’s
connection type. Your ISP connection settings are provided to you by
your ISP. To configure the Modem Router with the settings that your
ISP gave you, click “Connection Type”
(A) on the left side of the screen.
Select the connection type you use. If your ISP gave you DNS settings,
clicking “DNS”
(B) allows you to enter DNS address entries for ISPs that
require specific settings. Clicking “MAC Address” (C) will let you clone
your computer’s MAC address or type in a specific WAN MAC address,
if required by your ISP. When you have finished making settings, the
“Internet Status” indicator will read “connection OK” if your Modem
Router is set up properly.
(A)
(B)
(C)
Step 4 Configuring your Modem Router for Connection to your
Internet Service Provider (ISP)