Belkin N1 Wireless Modem Router F5D8631-4 - Manual (Page 47)

EN-46 EN-45
Using the Web-Based Advanced User Interface
EN-46 EN-45
Using the Web-Based Advanced User Interface
Setting WPA-PSK
1)
From the “Security Mode” drop-down menu, select “WPA-PSK
(no server)”.
2) For “Encryption Technique”, select “TKIP” or “AES”. This setting
will have to be identical on the clients that you set up.
3) Enter your pre-shared key. This can be from eight to 39 characters
and can be letters, numbers, or symbols. This same key must be
used on all of the clients that you set up.
4) Click “Apply Changes” to finish. You must now set all clients to
match these settings.