Belkin N1 Wireless Modem Router F5D8631-4 - Manual (Page 35)

EN-34 EN-33
Alternate Setup Method
EN-34 EN-33
Alternate Setup Method
Setting your Connection Type to Modem Only
(Disable Internet Sharing)
In this mode, the Modem Router simply acts as a bridge passing packets
across the DSL port. It requires additional software to be installed on your
computers in order to access the Internet.
1. Enable Bridge Service - Check this box to enable bridge service
2. VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual
Circuit Identifier (VCI) parameter here. (Assigned by your ISP).
Click “Apply Changes” to save and activate your settings. To go
back to the original settings before saving, click “Clear Changes”.
Or click any of the Quick-Navigation links for other options. Your
new settings will not be saved unless your click “Apply Changes”.
(1)
(2)