AMMCO 40111 Environmental Lathe Enclosure Conversion Kit User Manual
Page 11
Important: Always read and follow operating instructions.
• 11
Attach Hood Switch To Enclosure
Attach switch to “L” bracket and align with “Z” bracket.
Drill two 0.203-inch diameter holes thru the enclosure
base. Attach bracket to base.
Use washers, if needed, under switch bracket to align
the switch halves. Route cable along the rear of the
enclosure to the control box. Secure cable with cable
ties and adhesive mounting pads as required.
8.
Use the provided cable ties and attachment pads
as needed to fasten the wires.
9.
Plug in and check operation of each switch; raising
the hood, pushing the round red E-stop button, pushing
the square stop button, or taking your foot off of the
pedal switch should stop the brake lathe.
See also other documents in the category AMMCO Equipment:
- SM6000 PORTABLE MID-RISE LIFT (13 pages)
- AC2000M Motorcycle Lift (22 pages)
- AC1000M Motorcycle Lift (20 pages)
- 6002 Heavy Duty Drum/Disk Lathe (24 pages)
- 3000 Drum and Disc Brake lathe (20 pages)
- 3850 Drum & Disc Brake Lathe (24 pages)
- 4000E Drum and Disc Brake lathe (20 pages)
- 710 Vehicle Brake Lathe (24 pages)
- 7000 Disc Rotor Lathe (20 pages)
- 800 On-The-Vehicle Brake Lathe (28 pages)
- 1450 Brake Washer Systems (12 pages)
- 1475 Mobile Washer (8 pages)
- 2500 Brake Lathe Bench and Sign (4 pages)
- 2635 Scribe Toe Gauges (4 pages)
- 2760, 2760-50, Inch & Metric Rotor Micrometers (2 pages)
- 2800, 2801 Environmental Lathe-Enclosure (20 pages)
- 3950 Cylinder Hone (1 page)
- 40928 4 x 4 Pressed Hub Rotor (1 page)
- 4725 Sharpening (1 page)
- 4850 Brake Drum Grinder (4 pages)
- 6061 Grinding Wheel Dresser (1 page)
- 6936 Cross Feed Extension (1 page)
- 6950 Twin Cutter Tool (4 pages)
- 7300 Brake Bleeder (2 pages)
- 7301 High Pressure Brake Bleeder (2 pages)
- 7900 Twin Cutter Tool (8 pages)
- 8500 Brake Drum Micrometer (4 pages)
- 8545 Digital Drum Micrometer (1 page)
- 8899 Tool Kit for Non-vented Rotors (2 pages)
- 901175 Clip-on Silencer (2 pages)
- 9232GP Double Taper Cone Adapter Sets (2 pages)
- 927581 Mounting Hardware for the On the Car Lathe (4 pages)
- 9283651 Lead Screw Nut Replacement Kit (2 pages)
- 940175 Poly V-Belt and Pulley Kit (1 page)
- 941055 Assembly (4 pages)
- 9481 Chip Shields (1 page)
- 95000010 4x2 F-150 Truck Rotor (1 page)
- 95000140 1450 Brake Washer Filter Replacement (1 page)
- ADAPTEK Adapter Sets, 9310, 9311, 9312, 9313 (2 pages)
- Handwheel Kit Operating and Assembly (1 page)