American Lighting LED-NFPLUS-24V - Manual

www.americanlighting.com
WARNING: These products may represent a possible shock or fire hazard if improperly
installed or attached in any way. Products should be installed in accordance with these
instructions, current electrical codes and/or the current National Electric Code (NEC).
Use this rope light only with LED-NF-CONKIT and 24V DC power supply
WARNINGS - READ ALL INSTRUCTIONS BEFORE YOU START:
CAUTION - To reduce risk of fire, electric shock or injury to persons, pay close
attention to this manual and stay within its guidelines when using this product.
1. Do not cover this product as the covering may cause rope to overheat, melt or ignite.
2. Do not operate LED Neon Flexbrite while it is tightly coiled.
3. Do not submerge flexible light in liquids, or use the product in the vicinity of standing water or other liquids.
4. Do not route the cord or Flexbrite through walls, ceilings, doors, windows or any similar part of the building structure.
5. Secure this flexible light using only the mounting clips provided or factory recommended mounting track (sold separately).
6. Do not secure this product or its cord with staples, nails, or like means that may damage the insulation.
7. Do not use if there is any damage to the PVC housing or power cord insulation. Inspect periodically.
8. Do not install on gates or doors, where subject to continuous flexing.
9. Do not install in tanks or enclosures of any kind.
10. Follow instructions carefully when splicing LED Neon Flexbrite sections or attaching power cords. Ensure that all connections,
including the end cap on the last segment, are properly installed with dialectric grease and shrink tube to
preclude the entrance of water (outdoor applications).
11.
12.
13.
LED Neon Flexbrite can only be cut at specific intervals as indicated by the cutting marks printed on the side of the PVC
housing. Failure to cut at a cut mark will result in a loss of light. Before making any cuts or attaching any power cords
or jumpers, be sure power source is disconnected!
14.
This product is designed for use by a qualified installer.
This product is for decorative use only. Not to be used by children as a toy. Keep out of reach of small children.
Do not exceed maximum run distance in any single run:
Installation instructions for LED-NF-24V and LED-NFPLUS-24V
RV1336
CAUTION - To reduce risk of fire, electric shock or injury to persons:
Do not operate LED Neon
Flexbrite while it is tightly coiled.
WARNING - When using outdoor portable lighting products, basic safety precautions should always
be followed to reduce the risk of fire, electric shock and personal injury, including the following:
2. Use Ground Fault Circuit Interrupter (GFCI) protection on the circuit(s) or outlet(s) when using outdoors.
1. Use dialectric grease and shrink tube at all power connections including end cap when using outdoors.
LED Neon Flexbrite, Bulk Reel
Item Number (Color) Maximum Run
LED-NF-24V (RE) 21 feet
LED-NF-24V (AM, BL, GR, WH, WW, YE) 26 feet
LED-NFPLUS-24V (AM, RE, YE) 21 feet
LED-NFPLUS-24V (BL, GR, WH, WW) 20 feet