Allworx 9202 Phones - Manual (Page 19)

Phone Guide - 9202
300 Main Street • East Rochester, NY 14445 • Toll Free 1-866-ALLWORX • 585-421-3850 • www.allworx.com
© 2010 Allworx Corp. All rights reserved. Allworx, a wholly owned subsidiary of PAETEC Holding. All other names may be trademarks or
registered trademarks of their respective owners
Revised: September 2, 2010
Page 16
i. On Hook Dialing – Speaker mode will be enabled when a number on the keypad is pressed. Allows
numbers to be dialed without lifting the handset. The handset must be used for any outbound audio.
j. Paging Enable Mode – If the phone is to allow pages to be received.
k. Off Hook Answer Mode – Answers incoming calls when the phone is taken “off-hook”
l. Off Hook Ringing – The phone will ring when a new call is received while in use.
m. Auto on Hold – When another call comes in on a free Call / Line Appearance PFK while on an
active call, if the PFK for the new call is pressed, the first call is automatically put on hold instead of
ended.
n. Auto Retrieve Calls – When the phone is on hook and a call is on hold, if handset is taken off hook,
the call on hold is automatically retrieved.
o. Missed Call Tracking – Can choose what types of Appearances to track.
p. Parking Orbit Popups – Displays the Parking Orbit after call has been parked.
q. Hold Button Operation – Set the Hold button functions.
r. Force Auto Answer – Allows the phone to automatically answer incoming calls
s. Call Assistant CLID – Sets the call information displayed in Call Assistant and applications using the
Allworx TSP driver.
t. Emergency Caller ID - Caller ID used when an Emergency number is dialed from handset.
4. After making changes to the preferences listed above, press the Select button .
5. Press the EXIT soft key twice.
6. Select the YES soft key to save any changes OR select NO to cancel changes made.
7.4 Reboot the Phone
On occasion, rebooting the phone may be required. For example, when the Allworx server System
Administrator makes changes to the phone’s configuration, it must be rebooted.
1. Select the CONFIG soft key.
2. Highlight Reboot Phone .
3. Press the Select button .
4. If you have any unsaved changes, you’ll be asked if you want to save them before rebooting. Select the
YES soft key to save any changes OR select NO to cancel changes made.
5. Select the YES soft key on the next confirmation prompt to reboot.
7.5 Clear Call History
The Allworx phone retains the history of your calls up to 99 calls. You can clear your call history by using the
following steps:
1. Select the CONFIG soft key.
2. Scroll down and highlight Clear Call History .
3. Press the Select button .
4. Select the YES soft key to clear call history OR select NO to cancel.
7.6 Refresh Directory
If new users or extensions have been set up on the Allworx server, the on-phone directory will automatically be
updated after some delay. The directory may be updated immediately using the following procedure:
1. Select the CONFIG soft key.
2. Scroll down and highlight Refresh Directory .