Allen&Heath Xone 2D - Manual (Page 29)

Allen & Heath 29 XONE:2D User Guide
INPUT CHANNEL 5/6
1
3
2
MIC Input Socket
Female XLR3 connector for microphones
1
The input to Soundcard channel 5/6 can be either a Mic or Line source. The line source is
connected via RCA Phono connectors and the Mic source is via a female XLR3 socket.
Input channel 5/6 should be used for devices with a low output level such as MP3 players,
as the level control can be used to boost the signal level when the selector switch is in the
’LINE’ position. The level control adjusts the microphone input level when the selector
switch is in the ’MIC’ position.
Devices with output levels above –10dB should be connected to either Soundcard Input 1-
2 or Soundcard Input 3-4.
Level Control
The level control is used to amplify the incoming signal whether it
is a Mic or a Line source.
2
MIC / LINE Selector
Selects between Mic or Line input to Soundcard Input 5-6
3