AirLive WN-300R - Manual (Page 84)

PC Properties
Name If adding a new PC to the list, enter its name here. It is best if
this matches the PC's "hostname".
IP Address Select the appropriate option:
• Automatic - The PC is set to be a DHCP client (Windows:
"Obtain an IP address automatically"). The Wireless Router
will allocate an IP address to this PC when requested to do
so. The IP address could change, but normally won't.
• DCHP Client - Reserved IP Address - Select this if the PC
is set to be a DCHP client, and you wish to guarantee that
the Wireless Router will always allocate the same IP Ad-
dress to this PC.
Enter the required IP address. Only the last field is required;
the other fields must match the Wireless Router's IP ad-
dress.
• Fixed IP Address - Select this if the PC is using a Fixed
(Static) IP address. Enter the IP address allocated to the
PC. (The PC must be configured to use this IP address.)
MAC Address Select the appropriate option
• Automatic discovery - Select this to have the Wireless
Router contact the PC and find its MAC address. This is only
possible if the PC is connected to the LAN and powered On.
• MAC address is - Enter the MAC address on the PC. The
MAC address is also called the "Hardware Address", "Physi-
cal Address", or "Network Adapter Address". The
Broadband Router uses this to provide a unique identifier for
each PC. Because of this, the MAC address can NOT be left
blank.
Buttons
Add as New
Entry Add a new PC to the list, using the data in the "Properties" box.
If "Automatic discovery" (for MAC address) is selected, the PC
will be sent a "ping" to determine its hardware address. This will
fail unless the PC is connected to the LAN, and powered on.
Update Se-
lected PC Update (modify) the selected PC, using the data in the "Proper-
ties" box.
Clear Form Clear the "Properties" box, ready for entering data for a new PC.
Refresh Update the data on screen.
Standard
Screen Click this to view the standard PC Database screen.
AirLive WN-300R User’s Manual 78