AirLive WN-300R User Manual

Page 13

Text mode
Original mode

Connect LAN Cables

Use standard LAN cables to connect PCs to the Switching Hub ports on the Wire-
less Router. Both 10BaseT and 100BaseT connections can be used
simultaneously.

3. Connect ADSL Cable

Connect the DSL or Cable modem to the WAN port on the Wireless Router. Use
the cable supplied with your DSL/Cable modem. If no cable was supplied, use a
standard cable.

4. Power Up

Connect the supplied power adapter to the Wireless Router. Use only the power
adapter provided. Using a different one may cause hardware damage.

5. Check the LEDs

• The Power LED should be ON.
• The LAN LED should be ON (provided the PC is also ON.)
• The Wireless LED should be ON if Wireless PC is connected.
• The WAN LED should be ON if ADSL line is connected.
• The Internet LED may be OFF. After configuration, it should come ON.

For more information, refer to Front-mounted LEDs in Chapter 1.

AirLive WN-300R User’s Manual