AirLive WN-300R - Manual (Page 15)

3.2 Configuration Program
The Wireless Router contains an HTTP server. This enables you to connect to it, and
configure it, using your Web Browser. Your Browser must support JavaScript.
The configuration program has been tested on the following browsers:
• Netscape 7.1 or later.
• Mozilla 1.6 or later
• Internet Explorer V5.5 or later
Preparation
Before attempting to configure the Wireless Router, please ensure that:
• Your PC can establish a physical connection to the Wireless Router. The PC and
the Wireless Router must be directly connected (using the Hub ports on the Wire-
less Router) or on the same LAN segment.
• The Wireless Router must be installed and powered ON.
• If the Wireless Router's default IP Address (192.168.1.254) is already used by
another device, the other device must be turned OFF until the Wireless Router is
allocated a new IP Address during configuration.
Using your Web Browser
To establish a connection from your PC to the Wireless Router:
1. After installing the Wireless Router in your LAN, start your PC. If your PC is al-
ready running, restart it.
2. Start your WEB browser.
3. In
the Address box, enter "HTTP://" and the IP Address of the Wireless Router, as
in this example, which uses the Wireless Router's default IP Address:
HTTP://192.168.1.254
4. When prompted for the User name and Password, enter values as follows:
• User name admin
• Password airlive
AirLive WN-300R User’s Manual 9