AirLive WLA-9000AP PCBA - Manual (Page 9)

2. Install the WLA-9000AP
1 2 3 4 5 6
2
2. Install the 802.11 A/G
Access Point
This section describes the installation procedure for the WLA-9000AP. It starts with a
summary of the content of the package you have purchased, followed by steps of how to
power up and connect the WLA-9000AP. Finally, this section explains how to configure a
Windows PC to communicate with the WLA-9000AP.
2.1 What’s in the box?
The WLA-9000AP package contains the following items:
1. One WLA-9000AP main unit
2. One 5.5V 2.5A DC power adapter
3. Indoor detachable Omni Antenna x 2
4. One CD of the WLA-9000AP Quick Start Guide
2.2 Hardware Presentation
2.2.1 Front side introduction
LED # Display Description
Solid Green LED while the device is powered on, either by power
adaptor or PoE.
1 Power
2 WLAN1
3 WLAN2
Solid Green LED while the device is powered on. Blinking while there is
Data transmission, dark when this interface is turn off.
4 LAN 1
5 LAN 2
6 LAN 3
LAN ports status LED, Solid Green LED shows when a port is actively
connected, blinking while there is data transmission, turns into dark
when this disconnected.
AirLive WLA-9000AP User’s Manual 4