AirLive WLA-9000AP PCBA - Manual (Page 29)

3. Basic Configuration
Key Settings: The length of a WEP64 key must be equal to 5 bytes, a WEP128 key is 13
bytes, and a WEP152 key is 16 bytes.
Key Index: You have to specify which of the four keys will be active.
Once you enable the WEP function, please make sure that both the WLA-9000AP and the
wireless client stations use the same key.
Some wireless client cards only allow Hexadecimal digits for WEP
keys. Please note that when configuring WEP keys, a WEP128 ASCII
key looks like “ This is a key”(13 characters), while a WEP128 Hex
key looks like “ 546869732069732061206b6579”(26 HEX)
(hexadecimal notation are 0-9 and A-F).
802.1X as Client mode parameter
While the node is under client mode as a registered authenticated node of a RADIUS
server, the parameter to be set are the EAP type, User Name and Password. Please
contact your networking provider or MIS for further information.
WPA-PSK
AirLive WLA-9000AP User’s Manual 24