AirLive WLA-9000AP PCBA - Manual (Page 14)

3. Basic Configuration
If you are logging on for the first time, you should use the factory default setting “ airlive”.
The password is always displayed as a string of wildcards or dots. Click the LOG ON button
to start the configuration session.
3.2 Setup wizard
The Setup Wizard will guide you through a series of configuration screens to set up the
basic functionality of the device. Every time you modify the settings, remember to click
APPLY button to save the changes.
3.2.1 TIME SETTINGS
Setup Wizard>>Time Settings
After logging on, the Time Settings page appears. The device time is automatically set to
the local time of the management PC at the first time a connection is made. To modify the
device’s time, modify the appropriate fields, then click APPLY.
9
AirLive WLA-9000AP User’s Manual