AirLive WIAS-1200G User Manual
Page 173
AirLive WIAS-1200G
User’s Guide
165
st),
g
Step 5 (Cont). Add User
A new user can be added to the local user database. To add a
user here, enter the Username (e.g. test), Password (e.g. te
and MAC
(optional). Assign a policy to add this particular local
user (or use the default). Upon completing to add a user, more
users can be added to this authentication method by clickin
the ADD button.
Click Next to continue.
Step 6. Set Wireless – Access Point Connection
y
SSID: Enter a SSID (up to 32 characters) for the system.
The default is airlive. SSID (Service Set Identifier) is a
unique identifier used for the wireless client’s devices to
associate with the built in AP of AirLive WIAS-1200G.
y
Transmission Mode: AirLive WIAS-1200G supports two
transmission modes, 802.11b and 802.11 (b+g). Select
the appropriate transmission mode to work with the
wireless clients in the network.
y
Channel: If the default channel is occupied by many
other APs, it is necessary to select another channel from the Channel field for a better performance.
Click Next to continue.
Step 7. Save and Restart AirLive WIAS-1200G
Click Restart to save the current settings and restart AirLive
WIAS-1200G. The Setup Wizard is now completed.