AirLive WIAS-1200G - Manual (Page 161)

AirLive WIAS-1200G
User’s Guide
153
2) Click the right button of the mouse on “Local
Area Connection” icon and then select
“Properties” .
3) Select “Internet Protocol (TCP/IP)” and then
click Properties. Now, you can choose to use
DHCP or specific IP address, please proceed to
the following steps.
4) Using DHCP: If want to use DHCP, please
choose “Obtain an IP address automatically”
and click OK. This is also the default setting of
Windows. Then, reboot the PC to make sure an
IP address is obtained from AirLive WIAS-1200G.