AirLive WIAS-1200G User Manual
Page 119
AirLive WIAS-1200G
User’s Guide
111
Some major fields are required:
Setting Description
Merchant Login ID
This is the “Login ID” that comes with the Authorize.Net account.
Merchant Transaction Key
To get a new key, please log in Authorize.Net → Click Settings and Profile
→
Go to the “Security” section → Click Obtain Transaction Key
→
Enter
“Secret Answer”
→ Click Submit.
Payment Gateway URL
(default payment gateway)
MD5 Hash
To enhance the transaction security, merchant owner can choose to enable this
function and enter a value in the text box: “MD5 Hash Value”.
Note:
For detailed description, please see 4.2.1.6 Authentication Method – On-demand User
→ Payment
1.3 Configure the Authorize.Net Merchant Account to Match the Configuration of AirLive WIAS-1200G
Settings of the merchant account on Authorize.Net should be matched with the configuration of AirLive
WIAS-1200G:
Setting Description
MD5 Hash
To configure “MD5 Hash Value”, please log in Authorize.Net → Click
Settings and Profile
→ Go to the “Security” section → click MD5 Hash
→
Enter “New Hash Value” & “Confirm Hash Value” → Click Submit.
Required Card Code
If the “Card Code” is set up as a required field, please log in Authorize.Net →
Click Settings and Profile → Go to the “Security” section →
→ Check the Does NOT Match (N) box → Click Submit.
Required Address Fields
After setting up the required address fields on the “Credit Card Payment Page
Billing Configuration”
section of AirLive WIAS-1200G, the same requirements
must be set on Authorize.Net. To do so, please log in Authorize.Net → Click
Settings and Profile →
Go to the “Security” section →
→
Check the boxes accordingly → Click Submit.
1.4 Test The Credit Card Payment via Authorize.Net
To test the connection between AirLive WIAS-1200G and Authorize.Net, please log in AirLive WIAS-1200G. User
Authentication → Authentication Configuration →
Click the server On-demand User
→ On-demand User
Server Configuration
→
Payment → Payment Configuration
→
Select Authorize.Net →Go
to ”Authorize.Net Payment Page Configuration” section → Enable the “Test Mode” → Click Try Test and
follow the instructions