AirLive WIAS-1200G - Manual (Page 164)

AirLive WIAS-1200G
User’s Guide
156
2) Click the right button of the mouse on the “Local
Area Connection” icon and select “Properties”
3) Select “General” label and choose “Internet
Protocol (TCP/IP)” and then click Properties.
Now, you can choose to use DHCP or specific IP
address , please proceed to the following steps.
4) Using DHCP: If want to use DHCP, please
choose “Obtain an IP address automatically”
and click OK. This is also the default setting of
Windows. Then, reboot the PC to make sure an
IP address is obtained from AirLive WIAS-1200G.