AirLive VoIP-120A - Manual (Page 8)

Setting Set DHCP client #111# None
The system will change to DHCP
Client type
Setting
Set Static IP
Address
#112xxx*xxx*xxx*xxx#
Enter IP address using numbers on
the telephone keypad. Use the *
(star) key when entering a decimal
point.
DHCP will be disabled and system
will change to the Static IP type.
Setting
Set Network
Mask
#113xxx*xxx*xxx*xxx#
Enter value-using numbers on the
telephone keypad. Use the * (star)
key when entering a decimal point.
Must set Static IP first.
Setting
Set Gateway IP
Address
#114xxx*xxx*xxx*xxx#
Enter IP address using numbers on
the telephone keypad. Use the *
(star) key when entering a decimal
point.
Must set Static IP first.
Setting
Set Primary DNS
Server
#115xxx*xxx*xxx*xxx#
Enter IP address using numbers on
the telephone keypad. Use the *
(star) key when entering a decimal
point.
Must set Static IP first.
Setting Set Codec #130+[1-8]#
1:G.711 u-Law, 2: G.711 a-Law, 4:
G.729a, 5: G.726 16K, 6: G.726 24K,
7: G.726 32K, 8: G.726 40K,
You can set the codec you want to
the first priority.
Setting
Set Handset
Gain
#131+[00~15]# Handset Gain from 0~15
You can set the Handset gain to
proper value, default is 6
Setting
Set Handset
Volume
#132+[00~12]# Handset Volume from 0~12
You can set the Handset volume to
proper value, default is 10
Setting
Set Auto
Configuration
Mode
#137X#
Select the auto configuration mode, in
the X field, you can press the
following; 0:OFF 1:TFTP 2:FTP
You can set the auto configuration
method you want, default is off
Setting
Set Auto
Configuration
For TFTP Server
#135xxx*xxx*xxx*xxx#
Enter IP address using numbers on
the telephone keypad. Use the *
(star) key when entering a decimal
point.
Must set auto configuration method
to TFTP first
Setting
Set Auto
Configuration
For FTP Server
#136xxx*xxx*xxx*xxx#
Enter IP address using numbers on
the telephone keypad. Use the *
(star) key when entering a decimal
point.
Must set auto configuration method
to FTP first
4
AirLive VoIP-111A / 120A User’s Manual