AirLive VoIP-120A - Manual (Page 30)

packets’ priority. If you set the value higher than 0, then the voice packets will get the
higher priority to the Internet. But the QoS function still need to cooperate with the others
Internet devices. When you have finished the setting, please click the Submit button. If no
further changes are needed, please click the Save Change Item on the left side; then click the
Save button. The changes you have made will be saved and the system will reboot
automatically.
Figure 26. Other Setting
3.11 NAT Trans.
3.11.1 In NAT Trans. you can setup STUN function. These functions can help your ATA working
properly behind NAT.
3.11.2
STUN Setting: you can setup the STUN Enable/Disable and STUN Server IP address in this
page. This function can help your TA working properly behind NAT. To change these
settings, please following your ISP information. When you have finished the setting, please
click the Submit button. If no further changes are needed, please click the Save Change
Item on the left side; then click the Save button. The changes you have made will be saved
and the system will reboot automatically.
Figure 27. STUN Setting
26
AirLive VoIP-111A / 120A User’s Manual