AirLive VoIP-120A - Manual (Page 47)

5.
How to make a phone call
When your ATA is configured properly, you can make a phone call to your friend in the same Service provider.
If you want to make a phone call, you can dial the phone number and press “#” button to start to dial the
phone number.]
If you want to make a PSTN call (VoIP-110A only) , you can press “0#” button to switch to PSTN line than start
to dial the normal phone number.
The ATA also provides some functions that list as below:
1. Call Waiting: When a new call is coming while you are talking, you can push the Flash button to
switch to the new call. You can push the Flash button to switch between the two calls.
2. Call Hold: You can push the Hold key to hold the current call for a while, then push Hold key
again to keep talking.
3. 3-way conference: If you want to make a 3-way conference call, you can make a phone call to
the first phone number. After the call is established, push the Flash button then you can hear the
Dial tone, then make a phone call to the second phone number. When the second call is
established, press the Flash button again.
5.1.1
(Call Transfer Operation)
Blind Transfer (Unconditional Transfer)
B calls A, A and B establishes a connection and during the conversation, A performs a call
transfer to a third party. Firstly, A holds B’s conversation channel, presses #510# then keys
in the number of the third party. After that, A presses the hash symbol “#” to initiate the call
transfer to the third party.
Attendant Transfer
B calls A, A and B establishes a connection and during the conversation, A performs a call
transfer to a third party. Firstly, A holds B’s conversation channel, presses #511# then keys
in the number of the third party. After that, A presses the hash symbol “#” to initiate the call
transfer to the third party C. C accepts the incoming call and establishes a conversation
channel by answering the incoming ring tone, when A hangs up during the conversation with
C, the call is transferred where B and C will be in the same conversation channel, allowing
them to talk to each other.
5.1.2 3-way (Conference)
B calls A, A and B establishes a connection and during the conversation, A would like to add
another third party to the conversation. A holds the conversation channel with B, presses
#512# then keys in the number of the third party. After that, A presses the hash symbol “#”
to initiate the call to the third party C. Once C accepts the incoming call, A will then press the
function button “flash” to enable the 3-way calling mode, where all three parties can now talk to
one another.
5.1.3 (Call Waiting/Answering a Call on Waiting)
During the conversation between A and B, another third party C calls A, which A will notice from the
call waiting tone that can be heard from A’s side of the conversation channel. A will then hold B on
standby while switching to a different line in order to communicate with C. If B is still on hold and
A would like to talk to B again, A can release the hold off B and continue the original conversation.
43
AirLive VoIP-111A / 120A User’s Manual