AirLive VoIP-120A - Manual (Page 35)

3.12.9
FXS impedence Setting: you can setup the FXS in this page. When you are using different
country’s PSTN Phone, you have to set the country’s setting to meet the requirement.
When you have finished the setting, please click the Submit button. (For VoIP111A only)
Figure 30. FXS impedence Setting
3.13 MAC Clone setting
MAC Clone setting: This function changes the MAC Addresses of workstations in a LAN to which
that are identical to the WAN port; this is done due to the fact that some ISP
companies restrict the use of multiple MAC Addresses through PPPoE.
connect LAN port PC MAC Address to device WAN Port,let your PC MAC address with your device
are same MAC ； Because some ISP company should lock (PPPoE) MAC
Address。
31
AirLive VoIP-111A / 120A User’s Manual