AirLive N.Power User Manual
Page 86
10. Frequent Asked Questions
81
AirLive N.Power User’s Manual
====================================================================
Question
:
When I change my wireless operation mode, why can’t I find my AP anymore?
Answer: By Default, the DHCP server is turned on in Router mode. In other modes,
the DHCP server is turned off. If you get your IP address automatically, then
when you change from Router to AP/Client/WDS Bridge mode, your PC will
not be able to get IP address from DHCP server anymore. Therefore, you
should set the IP address manually.
====================================================================
Question
:
Where is the POE port for N.Power?
Answer: The PoE system used for N.Power is 12V Passive PoE. LAN1 is also used
as the passive PoE port.
====================================================================
Question
:
When I use PoE power with USB Storage, why do I get unstable performance
sometimes?
Answer: Please use a 12VDC power adapter that supply more than 1.25A of current.
====================================================================
Question
:
When I connect my PoE switch with N.Power, why doesn’t it work?
Answer: The N.Power use a 12V Passive PoE system, it is not the same as the 48V
system used by PoE switch. As matter of fact, connect the 48V system to
the N.Power might damage the device!