AirLive N.Power - Manual (Page 20)

3. Configuring the N.Power
15 AirLive N.Power User’s Manual
3.3.2 Web Menu Structure
We recommend users to browse through N.Power’s web management interface to get an
overall picture of the functions and interface.
After you enter the Web configuration, the following screen will appear:
Internet Settings: When you choose Router mode, the “Internet Settings” bottom
will be shown and you will be able to configure internet related functions here.
This menu will disappear when you switch to other wireless mode.
Wireless Settings: The N.Power’s wireless settings are different between wireless
modes. Only functions that are applicable to the wireless mode will show to
simplify configuration. You can also change the operation mode from this menu.
For explanation of different wireless modes, please refer to Chapter 1.
System Configuration: All non-wireless and router mode settings are in this
category. The system configurations including changing password, upload
firmware, backup configuration.
Status: This section for monitoring the status of N.Power. It provides information
on Device Information, Statistic, Client table, and Log.
Reboot: Most of settings will require to click the “Reboot” bottom to take effect the
settings you applied.
Language Selection: You can change the language for the Web interface from
here.
Language Selection
Internet Settings