Frequent askedquestions, Frequent asked questions – AirLive N.Power User Manual

Page 85

10. Frequent Asked Questions

AirLive N.Power User’s Manual

In this chapter, we will address some frequent asked questions about N.Power

Question

I plug my USB Storage into N.Power, but it can not be recognized

Answer:
1. Please make sure you have plugged the USB storage in the right direction.
2. Please make sure your USB storage is using FAT or FAT32 format. NTFS is not

supported

3. If your are using a USB hard drive, you need to connect the external power adapter.

===================================================================

Question

After Emergency Upgrade, I can’t find my N.Power at 192.168.1.254

Answer: The N.Power will restore to the previous settings after successful Emergency

upgrade. Therefore, the IP address will change to the previous IP address.
If you still can’t find N.Power in previous address, please do a restore to
default and the N.Power should appear at 192.168.1.254

====================================================================

Question

When I wan to use “Site Survey” tool to connect with a AP that has no

encryption, why does the N.Power report “encryption type mismatch!” and ask
me to configure the wireless security settings?

Answer: When you press “Connect” from site survey, the N.Power will first check if the

current wireless encryption setting is correct. If not, it will ask you to modify
the setting. Therefore, if your current wireless settings has encryption and
the new AP you want to associate does not use encryption, and then the
N.Power will report the mismatch. In this case, simple select “Disable” in the
encryption field and press “Apply Change”.

10.

Frequent Asked

Questions