AirLive N.Power - Manual (Page 17)

2. Installing the N.Power
AirLive N.Power User’s Manual
12
2.5 LED Table
This section describes the LED behavior of N.Power. You can find the LED on the top
side of the N.Power.
WPS (Power)
Steady Blue – Normal Operation
Slow Flashing: WPS Surveying
OFF – No Power
WLAN
Slow Flashing : Radio is active
Fast Flashing: Transmitting Data
OFF: Radio Disabled
LAN1 ~4, WAN
Steady Blue : Link established
Fast Flashing: Transmitting Data
OFF: No Link
2.6 Restore Settings to Default
If you have forgotten your N.Power’s IP address or password, you can restore your
N.Power to the default settings by pressing on the “reset button” for more than 10 seconds.
You might need a pen or pencil for this operation. The reset button is inside the bottom
case. Please see diagram below for details.