10 wds settings (repeater) – AirLive N.Power User Manual

Page 47

Text mode
Original mode

4. Configuration: Router Mode

AirLive N.Power User’s Manual

We recommend that you use the default settings on the WMM QoS
page. Changing these values can lead to unexpected blockages of
traffic on your wireless LAN, and the blockages might be difficult to
diagnose.

4.4.10 WDS Settings (Repeater)

This is known as WDS Repeater function. Enable this setting to allow remote WDS
equipped AP to extend the wireless signal of N.Power. Up to 4 WDS repeaters can be
connect with N.Power. WDS works by entering the wireless MAC addresses (also known
as BSSID) of remote Access Points.