AirLive N.Power - Manual (Page 52)

5. System Configuration and Status Menu
47 AirLive N.Power User’s Manual
5.2 LAN Interface Setup
System Configuration>> LAN Interface Setup
This menu is where you can configure all the aspect about LAN interface including IP
address, DHCP server settings..etc.
5.2.1 DHCP Settings
DHCP Service: You can enable or disable DHCP server here.
Disable: Disable DHCP server. By default, the DHCP server is OFF
in AP, Client, and WDS Bridge mode.
Server: The N.Power will act as DHCP server to provide IP addresses
to the clients on the LAN/Wireless interface. By default, the DHCP
server is on in router mode.
DHCP Client Range: You can define the IP pool from which the DHCP clients can
get IP address. Click on “Show Clients” to see the current DHCP client table.
Lease Time: You can define how long the N.Power will reserve IP address for a
particular PC or Devices here.
Device IP
Settings
DHCP
Settings