AirLive N.Power - Manual (Page 11)

2. Installing the N.Power
AirLive N.Power User’s Manual
6
2
2.
Installing the N.Power
This section describes the hardware features and the hardware installation procedure for
the N.Power. For software configuration, please go to chapter 3 for more details.
2.1 Before You Start
It is important to read through this section before you install the N.Power
The LAN1 port also work as the passive POE port
You must install the antenna first before plugging in the power. Otherwise,
the wireless radio might be damaged. Damage caused by not following
the installation procedure might void your warranty.
The passive PoE DC Injector is optional; it is not included with the package.
Please use a 12V passive POE system with N.Power’s passive POE port. Do
not use 802.3af 48V system or PoE switch with this device.
To protect the N.Power USB port from damage, please turn off the power when
plugging in or pulling out USB device from the USB port.
The USB port supports simple file sharing via FTP. Only storage using FAT or
FAT32 file format are supported.
The FTP functions only support file names with western alphabets (such as
English).
When using a USB hard disk with N.Power, external power adapter is required
for the USB hard disk.
2.2 Package Content
The N.Power package contains the following items:
One N.Power main unit
One 12V 1A DC power adapter
1 x Antenna
User’s Guide CD
Quick Start Guide