AirLive ePhone-2000S User Manual
Page 26
AirLive ePhone-2000S
English Version
-22-
unmap this DSS feature will turn off auto-answer configuration as well.
(3) Auto-Answer incoming calls arrive on specific registered SIP address-of-records.
For each service domain, you can configure to auto-answer all incoming calls to this SIP account
(
is particularly useful for IP-PBX to
implement broadcast feature. Alternatively this feature is also useful when the user have 2 SIP
accounts (or more), one for public and one for private use only, and he/she wants to
auto-answer all calls to his/her private account.
To configure the account-specific auto-answer feature:
z
Press 【FUNC】 + 【#】 to activate menu.
z
Go to submenu 『6. Network』/『2.SIP Settings』/『2.Service Domain』/『N
-th
Realm』
/『Auto-Answer』.
1
. E n a b l e d
.
2 .
D i s a b l e d
Default
is
Disabled.
Note, Web configuration page is
『
SIP Settings
』
/
『
N
-th
Domain
』
=> “Auto Answer”.
a. Once enabled, all calls destined to this specific service account will be auto-answered on
idle mode.
b. This works even when the system-wide auto-answering is off.
z
auto-answer
(1)
operation:
i.
On idle mode, the phone-set will play a distinguished auditable tone shortly, then answer the
call by turning on speaker-phone (or headset if applicable). By idle, it either takes no call or
is putting a call on hold.
ii.
Otherwise, proceed as normal incoming calls
z
Incoming call processing rules (by precedence):
i. If the phone is engaged in do-not-disturb mode, then DND wins
ii. Otherwise, if the phone has turned on unconditionally forward feature, then all incoming
calls are forwarded.
iii. Check for auto-answer feature:
a. Check for server-side auto-answer feature.
b. Check for the global switch for auto-answer feature.
c. Match this call against all enabled service domains for auto-answering feature, if a
match is located, auto-answer it.
iv. Otherwise, proceed as normal incoming calls.