Auto answer – AirLive ePhone-2000S User Manual
Page 25

AirLive ePhone-2000S
English Version
-21-
to tear down the conference and separate them into 2 independent calls first, then
disconnect each of them as your wish.
z
To place a conference call on hold, press the 【HOLD】 key. The other parties can not
talk among themselves. To avoid disrupting the other callers, consider muting the call
instead. To mute the call, press the 【MUTE】 button.
z
Call waiting calls cannot be conferenced in; the conferencing node must establish both
legs of the 3-Way conference.
z
You cannot perform transfer on conference calls.
z
The phone supports only 3-way local conference. To conference in additional callers, the
last person called with an IP SIP Phone can call an additional person, that new person
can then call someone else, and so on. This is called “daisy-chaining.
6. Auto Answer
If auto-answer feature is enabled when an incoming call arrives, the phone-set will play
distinguished auditable tone shortly, then answer the call by turning on speaker-phone (or headset if
it is enabled) on idle mode; otherwise proceed as a normal incoming call.
By idle, it means the phone-set is neither engaged in a call nor a call on hold.
IP SIP Phone
implements various ways to support auto-answer features:
(1) Server-side invoked auto-answer for urgent calls:
Use of a private header “P-Auto-answer” in the initial INVITE message for the server-side
invoked auto-answer extension:
Please refer to section 10.9 “Auto Answer” on “IP SIP Phone User’s Guide” for detail.
(2) Phone-set locally configured to auto-answer all incoming calls unconditionally.
a. Unconditionally auto-answer all incoming calls on idle mode can be achieved by either
configuring the global phone-set setting and/or map the auto-answer feature as a
programmable key.
b. To configure the global phone-set setting for auto-answer:
z
Press 【FUNC】 + 【#】 to activate menu.
z
Go to submenu 『5. Preferences』 / 『9.Auto-Answer』.
1
. E n a b l e d
.
2 .
D i s a b l e d
System default is Disabled
Note, Web configuration page is
『
Preferences
』
=> “Auto Answer”.
c. If you have mapped one of your DSS keys to “Auto-
Answer”, press this DSS to toggle
auto-answer mode. Once enabled, the corresponding red LED of mapped DSS key will be
on, and the phone will auto-answer
(1)
all incoming calls arrive on idle mode. Besides,