AirLive ePhone-2000S - Manual (Page 10)

AirLive ePhone-2000S English Version -6-
Menu』=>『6.Network』/『2.SIP settings』/『2.Service domain』/『1.1 st Realm』
z Activation: Enabled
z Authentication: Note: please remember to check for ending blanks and spaces;
if you erroneously input the ending spaces, the whole string (including
ending spaces) will be treated as your password without trim).
1. Server login: Michael
2. Server passwd: secret
z Address of record:
1. Display Name: Michael Jr. (Could be any combination of alphabets and numbers)
2. Protocol:
sip
3. Sip: [email protected]
z Proxy server:
1. Configuration: 2.Use default
2. Default proxy:
1. Proxy FQDN: sip.SIP.com
2. Transport: 1. UDP (or 3.TCP and UDP)
3. UDP port: 5060 （SIP proxy listening UDP port of your ISP.）
4. TCP port: 5060 (leave default intact)
z Registrar
1. Configuration: 1.Same as proxy
2. Registrar svr: leave default intact since the registrar and proxy server provided by
your ISP are the same
(4) If you have applied for more than one service domains, please repeat step (1) and (2) until
all active domains are properly configured. IP SIP Phone supports three different active
service domains at most.
(5) Press 【SPK】 to exit the configuration menu and the system will try to register to those
activated SIP domains. The flashing green LED of 【Registration】key indicates that the
registration is undergoing. Once the green LED stops flashing, you could know the
registration result by the LED:
Green LED On: Successfully register to all activated service domains.
Red LED On: At least one activated service domain could not be registered.
Green LED Flashes: Registration is in progress. Note, IP SIP Phone will regularly
refresh its SIP AoR registration as necessary.
Red LED Flashes: None of those activated service domains can be successfully
registered.
LED is off: Users explicitly logs out all SIP service and goes off-line ‘till user presses
the 【Registration】key again to go on-line (re-register to all SIP service).
Or press【Service Realm】to show registration status of each active service domain: