beautypg.com

AirLive ePhone-2000S User Manual

Page 12

background image

AirLive ePhone-2000S

English Version

-8-

(2) Call History

z

Press【Call History】to choose desired call lists:Missed/Received/Dailed numbers.

z

Traverse the list and pick up the target entry.

z

Press 【REDIAL】to dial out.

Note: if you press 【Call History】 while its red LED is flashing (indicating there are

unviewed missed calls), it will enter the “Missed calls” list directly.

(3) ENUM Dialing

z

Starting with【#】for ENUM dialing

z

Dial the target number (6 digits at least), ending with a【#】to speed up dialing phase.

E.g.: to call “tel:+886-3-5295000”, please dial “#88635295000#”。

(4) Intra-Domain Dialing

z

Enter the user part of the target AoR or dial alias number directly.

z

The target SIP service domain could be circle by press 【Service Domain】.

z

Press 【#】to finishing dialing.

Intra-domain dialing is applicable if both party registered to the same SIP domain

(possibly to the same SIP proxy/registrar server)。 E.g., if sip:[email protected]
wants to place a call to sip:[email protected], he could just dial 【3200#】 when
“Sip.com” has selected as target service domain.

(5) Contact Dialing

z

Use 【*】for 『@』 and『

.

z

Use 【**】 for 『

:

if the target SIP agent does not listen on UDP port 5060.

z

Press【#】to finishing dialing

E.g. 1: to call sip:

[email protected]

, please dial “3200*192*168*10*200”.

E.g. 2: to call sip:[email protected]:5070, please dial

”3200*192*168*10*200**5070”.

(6) IP Dialing

z

Use【*】for 『@』 and『

.

z

Use【**】for “

:

” if the target SIP agent does not listen on UDP port 5060.

z

Dial【#】to finish dialing.

E.g. 1: to call sip:

192.168.10.200

, please dial “192*168*10*200”.

E.g. 2: to call sip:192.168.10.200:5070, please dial ”192*168*10*200**5070”.

(7) LAN Dialing

(Applicable only while both parties locate on the same LAN and their IP prefix, 24-bits,
are the same).

z

Starts with a【*】

z

Dial the last suffix of target IP (the number must be between 1 and 255, inclusive).

z

Use 【**】for “

:

” if the target SIP agent does not listen on UDP port 5060.

E.g., if “192.168.10.200” wants to dial “192.168.10.31”, please dial 【*31#】 or