AirLive DS-100 User Manual
Page 6
1. Introduction
AirLive DS-100 User’s Manual
4
(2) One Gateway with multiple Network Ticket-Generator sets.
*Note:
The POS printer has an individual manual, therefore, its configuration details is not covered
in this guide.
Though DS-100 is specifically designed to for on-demand account generation and operate
POS printers, it can also be deployed independently to connect other RS232 devices to an
Ethernet network for remote operation. If you will be deploying DS-100 independently to
manage other serial devices, please carefully set the Serial Settings in DS-100 to match the
operating needs of your serial device.
*Note:
If you connect other serial device to DS-100 and are unable to remotely operate your
connected serial device, please check that:
The settings under Serial Settings of DS-100 are configured to match your serial device
operating requirements.
If your serial device application operates on pure serial communication then you need to
setup a COM port redirector.