AirLive DS-100 - Manual (Page 15)

3. Configuring the DS-100
AirLive DS-100 User’s Manual
13
DS-100 is designed specifically to operate in conjunction with all Gateways/Controllers.
If you are not using default settings, before connecting DS-100 to your Gateway/Controller,
some configurations steps are required. The configuration instructions for
Gateways/Controllers and DS-100 are covered in the following sections.
3.1 Important Information
The following information will help you to get start quickly. However, we recommend you
to read through the entire manual before you start. Please note the username and
password are case sensitive.
q The default IP address is: 192.168.1.10
q Subnet Mask: 255.255.255.0
q The default Gateway is: 192.168.1.254
3.2 Prepare your PC
The DS-100 can be managed remotely by a PC through RJ-45 cable. The default IP
address of the DS-100 is 192.168.1.10 with a subnet mask of 255.255.255.0. This means
the IP address of the PC should be in the range of 192.168.1.2 to 192.168.1.253 (do not
include 192.168.1.10).
To prepare your PC for management with the DS-100, please do the following:
1. Connect your PC directly to the copper port of DS-100
2. Set your PC’s IP address manually to 192.168.1.100 (or other address in the same
subnet)
3
3.
Configuring the DS-100