AirLive DS-100 - Manual (Page 12)

2. Installing the DS-100
AirLive DS-100 User’s Manual
10
FUNCTION
Press this button followed by selecting a
number and press Enter will perform a
specific action. The available combinations
are as follows:
n FUNTION + 1 + ENTER: Print out the IP
address of DS-100.
n FUNTION + 8 + ENTER: Enter panel test
mode.
n FUNTION + 9 + ENTER: Reset DS-100
to factory default.
n FUNTION + 0 + ENTER: Lock the panel
of DS-100. To Unlock, select your lock
number and press ENTER
DEC
Decrease the numeric display for selecting a
billing plan number.
ENTER
Create and print out an account for the
chosen billing plan.
2.4 Hardware Installation
The following diagram illustrates how to connect DS-100 to the POS printer and
Gateways/Controllers. Please follow the steps described below to install hardware: