AirLive AP60 - Manual (Page 82)

9. Emergency Firmware Recovery
AirLive AP60 User’s Manual 76
9.2 Emergency Upgrade Procedure
1. Please connect one of your LAN Ports (LAN1~LAN4) to your PC directly.
2. Set your PC’s IP address to 192.168.1.100
3. Before connecting the power, please press and holding the “Reset” button (in the back
of the AP). Then plug in the power. Keep press and hold the Reset button until the
LED of the selected port goes on(about 3 seconds)
4. Open a browser; type “192.168.1.6” for the website address. The following screen
should show up
5. Click the “Browse” button, select and open the correct firmware file. Please go to
www.airlive.com to AP60’s support page and download.
6. Click on “UPGRADE” button. Do not touch the AP or PC until the upgrade is
completed.
7. Wait for AP to finish reboot.